Flange Facing Services in Jazan
Jazan is far from workshops. Machining faces in place keeps shutdowns there on schedule.
Machining flanges in Jazan
The Jazan refinery and gasification power plant have high-pressure and high-temperature joints that must seal perfectly. Flange facing in Jazan machines damaged faces and grooves in place during shutdowns, with machines shipped ahead so they are ready when joints are opened.
Our portable flange facers clamp inside the bore or around the outside of the flange, are trued to its axis, and machine the sealing face back to the finish the gasket needs.
Most flange facing jobs in Jazan are part of a wider joint repair, so the same crew can also handle bolt torquing in Jazan and the other services below. For methods, equipment and standards, see our main flange facing services in KSA page.
Flange Facing jobs we do in Jazan
Work we are regularly asked for at refinery, power plant, port sites in and around Jazan.
Syngas and steam joints
Refacing high-temperature joints in the gasification and power plant.
Valve and pump flanges
End flanges and casing faces refaced during overhauls.
Repeat leak repairs
Joints that keep weeping are opened, the face is machined and the joint is rebuilt with a new gasket.
Our flange facing process in Jazan
Four steps, run under your permit-to-work system and recorded for your files.
Inspect and measure
We record the damage and check how much material can be removed within the flange rating.
Mount and true
The facer is clamped on the ID or OD and set square to the flange axis.
Machine
Light cuts remove the damage and a finishing pass gives the specified profile.
Verify
Finish, flatness and runout are checked and recorded before reassembly.
Getting a flange facing crew to Jazan
Jazan is one of our furthest destinations. Tools go by road ahead of the crew, with spares packed in every shipment.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates flange facing with bolting and the other joint services on the Jazan job.
Other joint services in Jazan
Every service a bolted joint needs, from the same team.
Bolt Torquing in Jazan
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in JazanPipe Cold Cutting in Jazan
Spark-free clamshell and split-frame cutting and bevelling for live plants where hot work is not allowed.
View pipe cold cutting in JazanNitrogen Purging in Jazan
Inerting, oxygen-free purging, drying and nitrogen leak testing before start-up or after maintenance.
View nitrogen purging in JazanHydrotest in Jazan
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in JazanFlange Facing in Jazan: common questions
How do you get flange facing machines to Jazan?
Machines and tooling travel by road ahead of the job, and operators fly in for the start date.
Can flanges be refaced in place in Jazan?
Yes. Our machines clamp to the flange where it is installed, so pipework and equipment stay in place and only the joint is opened.
How much material do you remove from a flange face?
Only enough to clean up the damage, usually a fraction of a millimetre. We measure first and never machine below the thickness the rating allows.
Flange Facing near Jazan
Our flange facing crews also work in these nearby cities.
Request flange facing in Jazan
Send the unit and dates in Jazan. We will reply with a mobilization plan.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.