Flange Facing Services in Jeddah
Seawater systems in Jeddah are hard on flange faces. We reface them in place, from small pump flanges to large intake lines.
Refacing seawater flanges in Jeddah
Desalination and power plants in Jeddah run seawater intakes, brine lines and pumps where corrosion and erosion damage flange faces. Flange facing in Jeddah repairs those faces in place, along with terminal and industrial flanges across the city.
Our portable flange facers clamp inside the bore or around the outside of the flange, are trued to its axis, and machine the sealing face back to the finish the gasket needs.
Most flange facing jobs in Jeddah are part of a wider joint repair, so the same crew can also handle bolt torquing in Jeddah and the other services below. For methods, equipment and standards, see our main flange facing services in KSA page.
Flange Facing jobs we do in Jeddah
Work we are regularly asked for at desalination, terminals, port sites in and around Jeddah.
Seawater pump flanges
Machining corroded pump casing and discharge flanges in desalination plants.
Valve and pump flanges
End flanges and casing faces refaced during overhauls.
Repeat leak repairs
Joints that keep weeping are opened, the face is machined and the joint is rebuilt with a new gasket.
Our flange facing process in Jeddah
Four steps, run under your permit-to-work system and recorded for your files.
Inspect and measure
We record the damage and check how much material can be removed within the flange rating.
Mount and true
The facer is clamped on the ID or OD and set square to the flange axis.
Machine
Light cuts remove the damage and a finishing pass gives the specified profile.
Verify
Finish, flatness and runout are checked and recorded before reassembly.
Getting a flange facing crew to Jeddah
Jeddah is on the opposite coast, so crews usually fly in while tools travel by road or come from Western Region stock.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates flange facing with bolting and the other joint services on the Jeddah job.
Other joint services in Jeddah
Every service a bolted joint needs, from the same team.
Bolt Torquing in Jeddah
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in JeddahPipe Cold Cutting in Jeddah
Spark-free clamshell and split-frame cutting and bevelling for live plants where hot work is not allowed.
View pipe cold cutting in JeddahNitrogen Purging in Jeddah
Inerting, oxygen-free purging, drying and nitrogen leak testing before start-up or after maintenance.
View nitrogen purging in JeddahHydrotest in Jeddah
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in JeddahFlange Facing in Jeddah: common questions
Can you reface duplex flanges in Jeddah?
Yes. We use tooling suited to duplex and stainless and keep the cut cool to protect the material.
Can flanges be refaced in place in Jeddah?
Yes. Our machines clamp to the flange where it is installed, so pipework and equipment stay in place and only the joint is opened.
How much material do you remove from a flange face?
Only enough to clean up the damage, usually a fraction of a millimetre. We measure first and never machine below the thickness the rating allows.
Flange Facing near Jeddah
Our flange facing crews also work in these nearby cities.
Request flange facing in Jeddah
Send the flange details and site in Jeddah. We will reply with a mobilization plan and price.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.