Flange Facing Services in Makkah
Utility systems in Makkah have short maintenance windows. Machining faces in place avoids long outages.
Fast flange repairs for Makkah utilities
Water and district cooling systems in Makkah must stay in service as much as possible. Flange facing in Makkah repairs pump, valve and chilled-water flanges in place during short windows, so systems return to service quickly.
Our portable flange facers clamp inside the bore or around the outside of the flange, are trued to its axis, and machine the sealing face back to the finish the gasket needs.
Most flange facing jobs in Makkah are part of a wider joint repair, so the same crew can also handle bolt torquing in Makkah and the other services below. For methods, equipment and standards, see our main flange facing services in KSA page.
Flange Facing jobs we do in Makkah
Work we are regularly asked for at water, district cooling, buildings sites in and around Makkah.
Chiller and pump flanges
Refacing chiller, pump and valve flanges in district cooling plants.
Repeat leak repairs
Joints that keep weeping are opened, the face is machined and the joint is rebuilt with a new gasket.
Valve and pump flanges
End flanges and casing faces refaced during overhauls.
Our flange facing process in Makkah
Four steps, run under your permit-to-work system and recorded for your files.
Inspect and measure
We record the damage and check how much material can be removed within the flange rating.
Mount and true
The facer is clamped on the ID or OD and set square to the flange axis.
Machine
Light cuts remove the damage and a finishing pass gives the specified profile.
Verify
Finish, flatness and runout are checked and recorded before reassembly.
Getting a flange facing crew to Makkah
Makkah is served by our Jeddah-based crews, and we plan work around the busy seasons.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates flange facing with bolting and the other joint services on the Makkah job.
Other joint services in Makkah
Every service a bolted joint needs, from the same team.
Bolt Torquing in Makkah
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in MakkahPipe Cold Cutting in Makkah
Spark-free clamshell and split-frame cutting and bevelling for live plants where hot work is not allowed.
View pipe cold cutting in MakkahNitrogen Purging in Makkah
Inerting, oxygen-free purging, drying and nitrogen leak testing before start-up or after maintenance.
View nitrogen purging in MakkahHydrotest in Makkah
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in MakkahFlange Facing in Makkah: common questions
Can flange facing be done during short windows in Makkah?
Yes. Machines are set up quickly, and we plan the work to fit the window.
Can flanges be refaced in place in Makkah?
Yes. Our machines clamp to the flange where it is installed, so pipework and equipment stay in place and only the joint is opened.
How much material do you remove from a flange face?
Only enough to clean up the damage, usually a fraction of a millimetre. We measure first and never machine below the thickness the rating allows.
Flange Facing near Makkah
Our flange facing crews also work in these nearby cities.
Request flange facing in Makkah
Send the system and window in Makkah. We will reply with a plan and price.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.