Flange Facing Services in Al Khobar
Contractors in Al Khobar call us when flanges arrive damaged or leak at commissioning. We machine them on site and document the result.
Fixing damaged flanges for Al Khobar projects
Flange damage found during construction or commissioning can hold up an entire test pack. Flange facing in Al Khobar lets contractors fix faces on site and keep the schedule, while utility and desalination plants nearby use it to repair faces on pumps, valves and seawater lines.
Our portable flange facers clamp inside the bore or around the outside of the flange, are trued to its axis, and machine the sealing face back to the finish the gasket needs.
Most flange facing jobs in Al Khobar are part of a wider joint repair, so the same crew can also handle bolt torquing in Al Khobar and the other services below. For methods, equipment and standards, see our main flange facing services in KSA page.
Flange Facing jobs we do in Al Khobar
Work we are regularly asked for at contractor projects, utilities sites in and around Al Khobar.
Commissioning leak repairs
Machining faces that leaked during testing so the test pack can be re-run quickly.
Valve and pump flanges
End flanges and casing faces refaced during overhauls.
Repeat leak repairs
Joints that keep weeping are opened, the face is machined and the joint is rebuilt with a new gasket.
Our flange facing process in Al Khobar
Four steps, run under your permit-to-work system and recorded for your files.
Inspect and measure
We record the damage and check how much material can be removed within the flange rating.
Mount and true
The facer is clamped on the ID or OD and set square to the flange axis.
Machine
Light cuts remove the damage and a finishing pass gives the specified profile.
Verify
Finish, flatness and runout are checked and recorded before reassembly.
Getting a flange facing crew to Al Khobar
Al Khobar is minutes from our base, which makes site surveys, meetings and short-notice work easy to arrange.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates flange facing with bolting and the other joint services on the Al Khobar job.
Other joint services in Al Khobar
Every service a bolted joint needs, from the same team.
Bolt Torquing in Al Khobar
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in Al KhobarPipe Cold Cutting in Al Khobar
Spark-free clamshell and split-frame cutting and bevelling for live plants where hot work is not allowed.
View pipe cold cutting in Al KhobarNitrogen Purging in Al Khobar
Inerting, oxygen-free purging, drying and nitrogen leak testing before start-up or after maintenance.
View nitrogen purging in Al KhobarHydrotest in Al Khobar
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in Al KhobarFlange Facing in Al Khobar: common questions
Do you provide flange facing records for contractors in Al Khobar?
Yes. We record the finish, flatness and material removed for each face, in the format your project needs.
Can flanges be refaced in place in Al Khobar?
Yes. Our machines clamp to the flange where it is installed, so pipework and equipment stay in place and only the joint is opened.
How much material do you remove from a flange face?
Only enough to clean up the damage, usually a fraction of a millimetre. We measure first and never machine below the thickness the rating allows.
Flange Facing near Al Khobar
Our flange facing crews also work in these nearby cities.
Request flange facing in Al Khobar
Send the flange details and project location. We will reply with a price for Al Khobar.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.