Nitrogen Purging Services in Abqaiq
Abqaiq handles enormous hydrocarbon volumes. Nothing is opened there until it has been purged and proven gas free.
Purging before and after work in Abqaiq
Stabilization trains, pipelines and manifolds at Abqaiq must be cleared of hydrocarbon before maintenance and inerted before they return to service. Nitrogen purging in Abqaiq provides both, along with nitrogen leak testing of joints tightened by our bolting crews.
Calibrated analysers confirm each stage, and every reading is recorded so your operations team has proof that the system is inert or dry.
Most nitrogen purging jobs in Abqaiq are part of a wider joint repair, so the same crew can also handle bolt torquing in Abqaiq and the other services below. For methods, equipment and standards, see our main nitrogen purging services in KSA page.
Nitrogen Purging jobs we do in Abqaiq
Work we are regularly asked for at crude processing, pipelines sites in and around Abqaiq.
Manifold gas freeing
Purging pipeline manifolds and launchers before cutting and tie-in work.
Blanketing
Holding equipment under a slight positive nitrogen pressure while it waits for start-up.
Drying after hydrotest
Dry nitrogen passed through until the outlet dew point meets specification.
Our nitrogen purging process in Abqaiq
Four steps, run under your permit-to-work system and recorded for your files.
Plan the purge
We set the volume, method, sample points and target with your operations team.
Set up supply
Liquid nitrogen with vaporisers or cylinder packs are positioned with relief protection.
Purge and sample
Flow and pressure are controlled while readings are taken at agreed points.
Confirm and record
Consecutive readings meet the target, are witnessed and handed over in writing.
Getting a nitrogen purging crew to Abqaiq
Abqaiq is a short drive inland from Dammam. Security is strict, so we arrange passes and inductions well before the job.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates nitrogen purging with bolting and the other joint services on the Abqaiq job.
Other joint services in Abqaiq
Every service a bolted joint needs, from the same team.
Bolt Torquing in Abqaiq
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in AbqaiqPipe Cold Cutting in Abqaiq
Spark-free clamshell and split-frame cutting and bevelling for live plants where hot work is not allowed.
View pipe cold cutting in AbqaiqFlange Facing in Abqaiq
On-site machining that restores flange sealing faces to the right finish and flatness, without removing the pipe.
View flange facing in AbqaiqHydrotest in Abqaiq
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in AbqaiqNitrogen Purging in Abqaiq: common questions
Do you leak test with nitrogen after bolting in Abqaiq?
Yes. Joints tightened by our crews can be nitrogen leak tested before process gas is reintroduced.
How do you know a purge is complete?
Readings are taken with calibrated analysers at agreed points. The purge is complete when consecutive readings meet the target, and the results are witnessed and recorded.
What oxygen level do you purge to in Abqaiq?
The target is set by your site procedures and the next activity. Inerting before hydrocarbons go in commonly aims for a low single-digit oxygen percentage or less, agreed before we start.
Nitrogen Purging near Abqaiq
Our nitrogen purging crews also work in these nearby cities.
Request nitrogen purging in Abqaiq
Send the system details and access dates for Abqaiq. We will reply with a purge plan.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.