Flange Facing Services in Qassim
Power and cement plants in Qassim cannot always wait for workshop repairs. We reface flanges in place during outages.
Refacing flanges during Qassim outages
Power stations, cement plants and water facilities in the Qassim region have pump, valve and piping flanges that wear in service. Flange facing in Qassim machines them in place during planned outages, so the plant returns to service on schedule.
Light cuts remove pitting, radial scratches and erosion, then a finishing pass produces the serrated, smooth or RTJ profile your joint calls for.
Most flange facing jobs in Qassim are part of a wider joint repair, so the same crew can also handle bolt torquing in Qassim and the other services below. For methods, equipment and standards, see our main flange facing services in KSA page.
Flange Facing jobs we do in Qassim
Work we are regularly asked for at power, cement, food, water sites in and around Qassim.
Power plant pump flanges
Refacing boiler feed and cooling-water pump flanges during outages.
RTJ groove re-cutting
Worn ring grooves on high-pressure joints re-machined and gauged before a new ring is fitted.
Construction damage
Flanges dented or scratched during construction corrected before commissioning.
Our flange facing process in Qassim
Four steps, run under your permit-to-work system and recorded for your files.
Inspect and measure
We record the damage and check how much material can be removed within the flange rating.
Mount and true
The facer is clamped on the ID or OD and set square to the flange axis.
Machine
Light cuts remove the damage and a finishing pass gives the specified profile.
Verify
Finish, flatness and runout are checked and recorded before reassembly.
Getting a flange facing crew to Qassim
Qassim is reached by highway through Riyadh, and we arrange accommodation near the plant for longer jobs.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates flange facing with bolting and the other joint services on the Qassim job.
Other joint services in Qassim
Every service a bolted joint needs, from the same team.
Bolt Torquing in Qassim
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in QassimPipe Cold Cutting in Qassim
Spark-free clamshell and split-frame cutting and bevelling for live plants where hot work is not allowed.
View pipe cold cutting in QassimNitrogen Purging in Qassim
Inerting, oxygen-free purging, drying and nitrogen leak testing before start-up or after maintenance.
View nitrogen purging in QassimHydrotest in Qassim
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in QassimFlange Facing in Qassim: common questions
Do you cover Buraidah and Unaizah for flange facing?
Yes. We work anywhere in the Qassim region.
How much material do you remove from a flange face?
Only enough to clean up the damage, usually a fraction of a millimetre. We measure first and never machine below the thickness the rating allows.
Do you reassemble the joint after facing in Qassim?
Yes. Our bolting crew can fit the new gasket and tighten the joint to a calculated load, so one team is responsible for the result.
Flange Facing near Qassim
Our flange facing crews also work in these nearby cities.
Request flange facing in Qassim
Send the plant and flange details in Qassim. We will reply with a plan and price.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.