Flange Facing Services in Riyadh
Riyadh power and water systems have large flanges that cannot easily be removed. We machine them in place.
Machining large flanges in Riyadh
Power plants, water pumping stations and the refinery around Riyadh all depend on flanges that seal reliably. Flange facing in Riyadh restores damaged faces on large water flanges, turbine and pump connections and process piping without removing equipment.
After machining we check the finish against a comparator and take flatness readings, so the joint can be rebuilt on a face that will actually seal.
Most flange facing jobs in Riyadh are part of a wider joint repair, so the same crew can also handle bolt torquing in Riyadh and the other services below. For methods, equipment and standards, see our main flange facing services in KSA page.
Flange Facing jobs we do in Riyadh
Work we are regularly asked for at power, water, refinery, projects sites in and around Riyadh.
Pump station flange repairs
Refacing pump and valve flanges at water pumping stations.
Corrosion pitting
Pitted faces cleaned up, with weld build-up and re-machining where the pits are deep.
Heat exchanger faces
Channel, shell and floating head faces machined in place, without sending the equipment to a workshop.
Our flange facing process in Riyadh
Four steps, run under your permit-to-work system and recorded for your files.
Inspect and measure
We record the damage and check how much material can be removed within the flange rating.
Mount and true
The facer is clamped on the ID or OD and set square to the flange axis.
Machine
Light cuts remove the damage and a finishing pass gives the specified profile.
Verify
Finish, flatness and runout are checked and recorded before reassembly.
Getting a flange facing crew to Riyadh
Riyadh is around four hours by road. Tools travel by truck and crews are usually on site the next morning.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates flange facing with bolting and the other joint services on the Riyadh job.
Other joint services in Riyadh
Every service a bolted joint needs, from the same team.
Bolt Torquing in Riyadh
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in RiyadhPipe Cold Cutting in Riyadh
Spark-free clamshell and split-frame cutting and bevelling for live plants where hot work is not allowed.
View pipe cold cutting in RiyadhNitrogen Purging in Riyadh
Inerting, oxygen-free purging, drying and nitrogen leak testing before start-up or after maintenance.
View nitrogen purging in RiyadhHydrotest in Riyadh
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in RiyadhFlange Facing in Riyadh: common questions
Can you machine lined water flanges in Riyadh?
Yes, where the flange design allows it. We check the lining and agree the machining extent before starting.
Do you reassemble the joint after facing in Riyadh?
Yes. Our bolting crew can fit the new gasket and tighten the joint to a calculated load, so one team is responsible for the result.
Can flanges be refaced in place in Riyadh?
Yes. Our machines clamp to the flange where it is installed, so pipework and equipment stay in place and only the joint is opened.
Flange Facing near Riyadh
Our flange facing crews also work in these nearby cities.
Request flange facing in Riyadh
Send the flange details and site in Riyadh. We will reply with a plan and price.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.