Pipe Cold Cutting Services in Jubail
In Jubail, most plants stay live around the unit being worked on, so a cut that throws sparks can stop the whole job. Our clamshell machines cut and bevel without any.
Cold cutting next to running units in Jubail
Jubail Industrial City packs olefins, polymer, chemical and refining units close together, which is why hot work permits there are hard to get and expensive to support. Pipe cold cutting in Jubail lets your team remove spools, valves and fittings next to running equipment without fire watches or wider shutdowns.
Our split-frame clamshell machines clamp around the pipe and cut and bevel it at low speed, so there are no sparks, no heat-affected zone and no grinding before the welder takes over.
Most pipe cold cutting jobs in Jubail are part of a wider joint repair, so the same crew can also handle bolt torquing in Jubail and the other services below. For methods, equipment and standards, see our main pipe cold cutting services in KSA page.
Pipe Cold Cutting jobs we do in Jubail
Work we are regularly asked for at petrochemicals, refining, utilities sites in and around Jubail.
Polymer line spool changes
Cutting out fouled or worn spools on polymer and chemical lines, with bevelled ends ready for the new pieces.
Spool removal for turnarounds
Cutting out corroded or obsolete spools and preparing the ends for new pieces inside the shutdown window.
Thick-wall and alloy cuts
Heavy-wall carbon steel, stainless, duplex and clad pipe cut with suitable tooling and speeds.
Our pipe cold cutting process in Jubail
Four steps, run under your permit-to-work system and recorded for your files.
Review and isolate
We confirm line size, schedule and content, and your team isolates and clears it under permit.
Support and mount
The pipe is supported either side and the split frame is clamped and centred.
Cut and bevel
Parting and bevel tools feed in together at low speed until the wall is through.
Check and hand over
Bevel angle, land and squareness are checked before the end is handed to your welders.
Getting a pipe cold cutting crew to Jubail
Jubail is a short drive from our Eastern Province base, so crews and equipment containers usually arrive the same day.
Machines, tools and consumables are checked against your scope before departure, and the crew arrives with PPE, permits planned and the paperwork your site asks for.
Calibrated equipment
Instruments and tools travel with current calibration certificates, listed in the job record.
Single point of contact
One supervisor coordinates pipe cold cutting with bolting and the other joint services on the Jubail job.
Other joint services in Jubail
Every service a bolted joint needs, from the same team.
Bolt Torquing in Jubail
Hydraulic torque wrenches and stud tensioners applying a calculated bolt load, pass by pass, with a tagged record for each joint.
View bolt torquing in JubailFlange Facing in Jubail
On-site machining that restores flange sealing faces to the right finish and flatness, without removing the pipe.
View flange facing in JubailNitrogen Purging in Jubail
Inerting, oxygen-free purging, drying and nitrogen leak testing before start-up or after maintenance.
View nitrogen purging in JubailHydrotest in Jubail
Hydrostatic pressure testing of piping, vessels and spools with calibrated pumps, gauges and recorders.
View hydrotest in JubailPipe Cold Cutting in Jubail: common questions
Can you cold cut lines inside a running Jubail plant?
Yes, provided the line itself is isolated, cleared and gas tested under your permit. The cut produces no sparks, so the surrounding units can keep running.
Does pipe cold cutting in Jubail need a hot-work permit?
The cut produces no sparks or flame, so most sites treat it as cold work. The site rules decide the permit, and the line must still be isolated, cleared and gas tested first.
Can you cut and bevel in one set-up in Jubail?
Yes. The parting tool and bevel tool run on the same frame, so the pipe is cut and bevelled in one set-up, including compound bevels and J-preps.
Pipe Cold Cutting near Jubail
Our pipe cold cutting crews also work in these nearby cities.
Request pipe cold cutting in Jubail
Send the line sizes, materials and the plant in Jubail. We will confirm machines and a start date.
- Phone+966 50 605 8927
- Emailalviqaisar@gmail.com
- BaseEastern Province, Kingdom of Saudi Arabia
- HoursOffice Sunday to Thursday, 7 AM to 5 PM. Field call-outs any day, any hour.